Honda Trail 125 - Assembly of the OEM Rear Footpegs

[vintagegarage]

Here is a video I made a week ago. It is slow as I am old (LOL) and wanted to document the part numbers for any one who wanted to make a set for their Trail 125:

Please give it a like if you like it..

 

[TrailBoss]

Very informative. I thought the bungs they put into where these mount were metal and welded. Is that not the case? Did you manage to get these mounted?

 

[vintagegarage]

Yes, the bungs are welded in. You drill a hole in the middle of them and then tap the hole and install the pegs with the mounting bolts, two on each side. The bungs are very sturdy. I did it on my 2019 Supercub, but haven't yet done it on a Trail 125. This photo by coolpixer shows the process on a Super Cub 125. I will make a video of the process when I do it on my Trail 125.

 

[m in sc]

what was the cost of the stuff total, just curious

 

[vintagegarage]

Roughly $327. $104 for the exhaust shield, $189 for the other parts, $34 for surface (ocean) shipping.

 

[m in sc]

gotcha, thanks. I'll machine my own plates I think.

 

[vintagegarage]

Overnight, Beezdeals just added a set of rear foot pegs to their online store.. Have a look at:

https://beezdeals.com/product/rear-passenger-pegs-set-honda-ct125-trail-125/

 

[AZ7000']

They look good. I was initially going for but couldn’t find them so I got the ones that bolt around the swing arm.

they are nice enough and a super easy install

also beezdeals

 

[Arkansas rider]

Here is a video I made a week ago. It is slow as I am old (LOL) and wanted to document the part numbers for any one who wanted to make a set for their Trail 125:

Please give it a like if you like it..

I couldn't find Honda part number for the parts separately. I ordered some on Ebay from Hondacub. From Thailand.

 

[Ken]

Overnight, Beezdeals just added a set of rear foot pegs to their online store.. Have a look at:

https://beezdeals.com/product/rear-passenger-pegs-set-honda-ct125-trail-125/

Are those hard to put on?

 

[hondaman3]

Hello, I have a 2019 SuperCub. Are the part numbers the same for the factory Honda rear foot peg components as were used on the trail125?

 

[dmonkey]

Some parts are in common, others are different.

2021 Super Cub: https://www.bike-parts-honda.com/ho...CUB/2021/C125K/Frame/STEP/103849/F_30/2/42414
2021 Trail: https://www.bike-parts-honda.com/ho...T/2021/CT125AL/Frame/STEP/103620/F_30/2/41272

 

[hondaman3]

Perfect. Thank you very much. I will get my list together. I’m assuming many of the components are available at US Honda Dealers, but the brackets that the pegs go into are probably Japanese-Thailand only.
I assume those of you who’ve tapped the bungs in the frame used an M8? Do you know the thread pitch? Thanks a million! Adam

 

[hondaman3]

I just began reading about the new 2022 Super Cub and that it now comes with room for two passengers. Does anyone know if we 2019, 2020, and 2021 owners could just buy replacement pegs for the 2022 version and avoid the whole overseas parts delay and ordering ordeal when ordering parts? My particular 2019 Super Cub already has the factory rear rack with seat cushion. It sure would be nice to just order the 2022 passenger foot rests and bolt them to the 2019 swingarm (with a little tap work of course)

any thoughts would be appreciated

 

[m in sc]

typical/common m8x1.25 is what i used.

 

[1wrenchguy]

Looking at this for my first mod. I noticed Beez has their version. From past experience (mistakes) I've learned factory OEM is better. Has anyone had any luck with the knock-offs?

Thank you dMonkey for the parts list. Trying to do the math on whether it's more cost effective to order from the UK or Japan if I'm in the US.