theazexpedition
Member
- Joined
- May 16, 2022
- Messages
- 44
First off, absolute pain to take off the spinning weights. Impact, rag (for scratches, and some grippy boys pictures below was the effective method.
I didn’t leave enough length to put the weights back on cause I didn’t measure beforehand.
Cut the stock grips. Sanded down throttle tube- passenger side needed no sanding. Work the grips on quick cause the glue (where gloves and don’t use TOO much glue). Had the mess with the throttle cable housing afterword cause it was sticking.
They get warm, look nice, and feel great. Would recommend! Should extend my riding season here in CO.
I didn’t leave enough length to put the weights back on cause I didn’t measure beforehand.
Cut the stock grips. Sanded down throttle tube- passenger side needed no sanding. Work the grips on quick cause the glue (where gloves and don’t use TOO much glue). Had the mess with the throttle cable housing afterword cause it was sticking.
They get warm, look nice, and feel great. Would recommend! Should extend my riding season here in CO.