Price Check

[Fenster66]

Same as AZ. I called the dealer, they had one in route with no deposit on it. So I asked for pricing and they told me $5780 or something. I told them that seemed high, so he went back to his manager and they said that actually the freight costs weren't correct, so the real out the door price I will be paying is $5300. I'm sure they were just playing games to try and get a little extra out of someone, but a little pushback got them back to a realistic price.

I paid $5240 out the door in a state with 9.75% sales tax. Included $82 delivery fee. I wasn't too keen on taking it onto the Interstate on day one. Or any day for that matter.

 

[SLO]

I am interested to know what $800 got you?

Yuminashi 143cc big bore kit with a 238 cam. $256.00 Stainless exhaust ( racing type means no cat, fyi )$320.00, K&N type air filter $85.00 , Honda 150 adv fuel injector $ 69.00 Bar risers $50.00.

Yuminashi direct USA ,Webike Japan I absolutely will help. A plus 1500 lb lift would be a lot better than down on the floor,which was the difficult part. I thought of the Harbor freight route, but decided to splurge and spend an extra $ 1100 bucks. I Smile every time I pass by it.

 

[Edwardmichaelmotorcycle]

Yuminashi 143cc big bore kit with a 238 cam. $256.00 Stainless exhaust ( racing type means no cat, fyi )$320.00, K&N type air filter $85.00 , Honda 150 adv fuel injector $ 69.00 Bar risers $50.00.

Yuminashi direct USA ,Webike Japan I absolutely will help. A plus 1500 lb lift would be a lot better than down on the floor,which was the difficult part. I thought of the Harbor freight route, but decided to splurge and spend an extra $ 1100 bucks. I Smile every time I pass by it.

Does it require a tune or no ?

 

[SLO]

Does it require a tune or no ?

No. Per YUMINASHI website. I have about 1400 miles on BBK.

 

[SLO]

I am interested to know what $800 got you?

I forgot, 3/0 244 SHINKO tires, 110 bucks?. I am also running a 13 tooth in front. 20 bucks?. Drill a couple holes to raise front fender for clearance of tires in front. I over gapped the top two rings by accident, but I recommend doing so as I do believe it will prevent it from failing. It smoked a little on startup,then quit after it warmed up. After 1400 miles on bbk, I pulled out on Hwy 91,and a car comes flying around corner and I am wide open on throttle and when I hit second gear the rear tire spun and It actually slid and I had to recover from overpower. I could not believe myself.I keep forgetting,but I will check compression. 13 tooth in front is a must.Try and blow it up!

 

[Edwardmichaelmotorcycle]

I forgot, 3/0 244 SHINKO tires, 110 bucks?. I am also running a 13 tooth in front. 20 bucks?. Drill a couple holes to raise front fender for clearance of tires in front. I over gapped the top two rings by accident, but I recommend doing so as I do believe it will prevent it from failing. It smoked a little on startup,then quit after it warmed up. After 1400 miles on bbk, I pulled out on Hwy 91,and a car comes flying around corner and I am wide open on throttle and when I hit second gear the rear tire spun and It actually slid and I had to recover from overpower. I could not believe myself.I keep forgetting,but I will check compression. 13 tooth in front is a must.Try and blow it up!

I'll have to wait and see if they make one for the '23s. My understanding is that the cylinder head bolts are closer together on the new bikes since they changed the stroke etc on them. Sounds like a good winter project to me...

 

[dmonkey]

Here are some of the big bore kit options that are out for the Euro-5 engine that is in the 2023 Honda Trail JA65:
https://www.kitaco.co.jp/goods_detail_en/P212-1452050
https://www.dhmotoring.com/collections/2022-engine-performance/products/dhmjc92bbk

 

[Edwardmichaelmotorcycle]

Here are some of the big bore kit options that are out for the Euro-5 engine that is in the 2023 Honda Trail JA65:
https://www.kitaco.co.jp/goods_detail_en/P212-1452050
https://www.dhmotoring.com/collections/2022-engine-performance/products/dhmjc92bbk

Thanks Dmonkey I'll check it out.