What's new
Honda Trail 125 Forum

Welcome to the Honda Trail 125 Forum! We are an enthusiast forum for the Trail 125, Hunter Cub, CT125 or whatever it's called in your country. Feel free to join up and help us build an information resources for this motorcycle. Register a free account today to become a member. Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Uprated Takegawa oil pump

ByteOfTheCherry

New member
Joined
Nov 25, 2021
Messages
17
can anyone confirm if the uprated Takegawa pump(as featured on the webike/hardracing sites) and listed as fitting the monkey will fit the CT...am getting conflicting answers...???
 

PegLegRacer

New member
Joined
Jul 21, 2021
Messages
9
Location
Louisiana
It works fine. Ordered mine from HardRacing, and have about 1500 miles on the new pump.

Be prepared to lean the bike over to the left side to reinstall the right side cover. The auto clutch linkage is a bit of a fight to realign, but leaning the bike over solves the issue.
 

ByteOfTheCherry

New member
Joined
Nov 25, 2021
Messages
17
It works fine. Ordered mine from HardRacing, and have about 1500 miles on the new pump.

Be prepared to lean the bike over to the left side to reinstall the right side cover. The auto clutch linkage is a bit of a fight to realign, but leaning the bike over solves the issue.
Thanks for that, I took a chance and ordered from Japan so have it to hand, I'll be fitting the end crank bearing & gear shaft support kits as well...then going for a Tagegawa 143 c.c./cam change...??...looking for more torque...any one any opinions...??
 

-Nate

New member
Joined
Nov 5, 2021
Messages
19
Is it in yet ? .

When you lean the bike over to re assemble the AutoClutch linkages, be SURE the shift pedal doesn't touch anything else the splines will be one or more off resulting in poor clutch action .
 

ByteOfTheCherry

New member
Joined
Nov 25, 2021
Messages
17
Is it in yet ? .

When you lean the bike over to re assemble the AutoClutch linkages, be SURE the shift pedal doesn't touch anything else the splines will be one or more off resulting in poor clutch action .
Thanks for the tip
 
Top