Menu
What's new
By:
Filters
Honda Trail 125 Forum

Welcome to the Honda Trail 125 Forum! We are an enthusiast forum for the Trail 125, Hunter Cub, CT125 or whatever it's called in your country. Feel free to join up and help us build an information resources for this motorcycle. Register a free account today to become a member. Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. J

    front foot rest replacement?

    It looks like its just the feeler (or whatever its called) that's bent. I had a tumble on mine while i was riding along the side of a hill and my foot peg got all wonky like that. I was able to just bend it back into place. As long as the foot rest isn't all mangled you should be good with a...
  2. J

    Best non-BBK power mods?

    Just putting in my opinion on the fuel controller I had the Takegawa FI-con and can confirm the "cutting out/resetting" as you are riding. It didn't feel dangerous or anything. Probably 1-2 power strokes worth of miss but still. I switched to the EFIE and the power delivery and throttle are...
  3. J

    Bam - Busted off my RHS cover tabs

    Hey. Welcome to the club. I've broken off almost all of the pesky tabs. You are going to feel so free now that the fear can't hurt you anymore. Taking off and putting on the body panels is going to be a breeze from here on out.
  4. J

    JA65 S-Stage Alpha Big Bore Kit 145cc

    i have 0 surge on the (possibly fake) PCX, 155cc, or 170cc
  5. J

    Shifter Mod

    I'm going to +1 team toe/toe. Toe down on the front, toe down on the back.
  6. J

    Instant regret?

    Pittsburgh_Bob rollin up on his stock motorcycle all enjoying himself
  7. J

    Chain and sprockets

    i have absolutely no use for it getting groceries but 13/51 sounds like it would be amazing for a few of the places I've found off-road. I'm jealous
  8. J

    For those of you running milk crates……

    Dude.... Freaking Genius!
  9. J

    Sightings thread

    My buddy saw these in Texas. Who dis?
  10. J

    What Fuel for the CT...

    E10 all day. 87 on the stock motor 93 with the BBK. My push mower is getting close to 10 years old and has had E10 in it, in the humid south, its whole life. It sits from late October to mid April with whatever gas was in it and starts up in the first 1-3 pulls. Never have i ever had to change...
  11. J

    Suggest a forum where members just can post pics of their Trail 125

  12. J

    JA65 S-Stage Alpha Big Bore Kit 145cc

    Im going to throw in my FI-con personal experience. You will have to disassemble just about every body part, and move the gas tank to the side. Its a project but not too too terrible. The MAPs that takegawa provides are good as far as my butt can tell. The only problem i had that made me...
  13. J

    Noises at idle when running hot

    If its any help that sounds a lot like my bike when the clutch needs adjusting or after i adjust it wrong. Its got the same tone and gives a pop when i lift off after a shift, just not constantly at idle. Id troubleshoot that like others have said to rule it out.
  14. J

    Old Gas ?

    Im also a humid southerner My 7yo push mower sits from October to April with whatever E10 is in it and starts the first or second pull. The 2021 trail usually only gets 1 fill-up in the winter. No problems with either. You are good as long as you are using reputable gas stations
  15. J

    Changed my rear sprocket out for better RPMs at high speeds

    Did we ever figure out how big we can go on the rear sprocket with the stock 14t before the ABS goes off?
  16. J

    Injector question

    The PCX should be good but i would like to point out that Yuminashi suggests a 155cc injector for the 143 (that they just so happen to sell so 50/50 if that's marketing). I ordered the 155 and 170 and both work well. With my EFI-E set to 250 the mini 3 AFR shows 12.5 under WOT, 13.0 at cruise...
  17. J

    Exhaust Thread

    i got the yoshimura gp-magnum. Its louder than stock but not obnoxious and build quality seem good enough for me. It doesn't come out of the box with leg protection for passengers but i think you can buy a guard from them. I just wrapped that small portion with 2 layers of exhaust wrap and its...
  18. J

    CT125 engine randomly cutting out at high speeds

    When i had the Takegawa FI-Con installed it would do this randomly at different speeds so if a future person is getting this and has that installed check there too.
  19. J

    AFR reading E0 vs E10

    Suspend disbelief and assume we are in a perfect world only using the finest stuff here Stoic for E0 is 14.7 Stoic for E10 is 14.1 Lets say i want to target 12.5 AFR on a stock bike. If i run E0 then i want my magically generic AFRometer to read 12.5:1. If i run E10 should I target closer to...
  20. J

    Straight Talk about Torque

    I would like to add my shadetree experience for science purposes Im on my 3rd BBK due to heat failure. I doubt it was because i didn't use a torque wrench but im no expert. All the builds went fine, no weird rattles or vibrations. Its survived 100 degree weather with high humidity with the 170...
Top