What's new
Honda Trail 125 Forum

Welcome to the Honda Trail 125 Forum! We are an enthusiast forum for the Trail 125, Hunter Cub, CT125 or whatever it's called in your country. Feel free to join up and help us build an information resources for this motorcycle. Register a free account today to become a member. Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Hello from NW AZ

MohaveBill

New member
Joined
Jun 26, 2022
Messages
5
Have been casually looking since they came stateside and finally picked up a 2022 yesterday in Parker AZ.

Haven't had a two-wheeler in a while.
Previous bikes: DR350, KLR650, XT350s, street bikes...there was a 1970 CT90 in there somewhere.

Plan to commute maybe once/week and outfit it for bird hunting.
Thinking Wald giant rack and horizontal scabbard on left side.

My big, yellow, full face, visored dual-sport helmet seems like overkill.
Looking at the "fuller coverage" MIPS MTB helmets.

Probably be about 90% forest roads/trails and 10% pavement.

Looking forward to browsing the site for ideas and welcome everyone's input.

Bill
 

SneakyDingo

Well-known member
Joined
Aug 6, 2021
Messages
1,573
There's an endurance rod case that might be of interest to you. But the ol' PVC piping on the back right might do the trick just fine. Be warned that the toolbox mount is on the weak side if you're thinking of mounting it there, prone to cracking and the like. You can either reinforce it or bolt it to the rack itself as two ways to get around the issue.
 

MohaveBill

New member
Joined
Jun 26, 2022
Messages
5
Hey that rod case is pretty snazzy. I'll look for more pictures.
I'll need some padding for the scattergun so PVC might end up huge to accommodate.
It may be possible to adapt the Kolpin gun boot from my ATV but it is an awkward beast.
Thanks for the help!
 

Gene56

Active member
Joined
Jul 27, 2021
Messages
138
Aloha and welcome to the forum, lots of good info, enjoy!
 

MohaveBill

New member
Joined
Jun 26, 2022
Messages
5
Hey Sgt, how goes the install?
I have taken apart my Kolpin GunBoot IV mount from my ATV and may be able to cob something together.
Going to Home Depot for some hardware this morning.
 

SgtAlf

Member
Joined
Jun 22, 2022
Messages
61
Location
Bayville, NJ
Hey Sgt, how goes the install?
I have taken apart my Kolpin GunBoot IV mount from my ATV and may be able to cob something together.
Going to Home Depot for some hardware this morning.
It's done! Check the tread "Gun Rack" in "What's New"
 
Top