Some time ago I added this to a Webike parts order, finally got around to installing it. Only took a few minutes, was anxious to do something with the bike as I'm recovering from a hand surgery. This is purely a dress up farkle, it serves the same function as the OEM sensor guard and probably isn't much better or worse.
https://japan.webike.net/products/24634165.html
https://opmid.co.jp/?page_id=2447#A1002BK
Part Number: A1002BK
Tools used:
Socket wrench
Socket extension to help reach the fasteners and avoid busting a knuckle
8 mm six-point socket, for removing OEM bolt
5 mm hex/allen, for installing OPMID bolt
Pliers (Leatherman) used to remove the o2 sensor wire retainer from the old guard and move it to the new one, there is a rubber push-in bumper that needed to be squeezed and pulled out
Now it looks like my options are to either wash the bike or get the new sensor guard dirty
https://japan.webike.net/products/24634165.html
https://opmid.co.jp/?page_id=2447#A1002BK
Part Number: A1002BK
Tools used:
Socket wrench
Socket extension to help reach the fasteners and avoid busting a knuckle
8 mm six-point socket, for removing OEM bolt
5 mm hex/allen, for installing OPMID bolt
Pliers (Leatherman) used to remove the o2 sensor wire retainer from the old guard and move it to the new one, there is a rubber push-in bumper that needed to be squeezed and pulled out
Now it looks like my options are to either wash the bike or get the new sensor guard dirty