What's new
Honda Trail 125 Forum

Welcome to the Honda Trail 125 Forum! We are an enthusiast forum for the Trail 125, Hunter Cub, CT125 or whatever it's called in your country. Feel free to join up and help us build an information resources for this motorcycle. Register a free account today to become a member. Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Service Manual

G19Tony

Well-known member
Joined
Jan 24, 2021
Messages
801
Location
Las Vegas, NV
OK, I don't know of any one that's put a two mount system on this bike yet. We've all been using the one handlebar mount, but I want to put the larger storm with the bar-end mount on it and get the mount off the handlebar. Good luck with your two mount system. It will protect more in a tip-over. I'm only concerned with wind and bugs. Be sure to post pictures. I'd like to see yours mounted. Those are the narrow ones like we have been mounting, I see. I want the larger Storm model. The link you sent was just the mount, then you have to find the plastic for it. Hey, I have a set of yellow plastic for that mount that I put on Ebay. Did you find an outlet for Both the mount and the plastic yet? Got a price?

No price yet. They'll come from Twisted Throttle. I expect it'll be around a hundred, plus whatever plastics I get. I'll get the bar end weights also. I'm after the fall protection. The photos look like they mount up well. We'll see. They won't be in country until the end of March, early April. The plastics are a separate purchase. I'll order it all at once.
 

Spydie

Member
Joined
Feb 7, 2021
Messages
62
No price yet. They'll come from Twisted Throttle. I expect it'll be around a hundred, plus whatever plastics I get. I'll get the bar end weights also. I'm after the fall protection. The photos look like they mount up well. We'll see. They won't be in country until the end of March, early April. The plastics are a separate purchase. I'll order it all at once.
I see they are out of stock at Cyclegear.com also
 

Spydie

Member
Joined
Feb 7, 2021
Messages
62
I got my front carry rack and exhaust pipe crash bar today from Beez Deals. I guess the Chinese New Year didn't hold it up any. I ordered on the 9th and it shipped on the 10th. It took only 7 days.

beez.JPG
 

B18CXr

Member
Joined
Feb 3, 2021
Messages
20
Location
Carolinas
They are now arriving..


 

Spydie

Member
Joined
Feb 7, 2021
Messages
62
Does anyone remember the early CT90 bikes? I had a 1971 I was just looking at the picture of. I have been in situations with bikes that don't have a manual clutch lever, and especially our new CT125, where I'm stuck, or out of power, going up a steep and slippery hill, where I've stopped and I need to roll backwards to turn around. The problem is, both feet are on the ground so I can't work the foot brake. And the front brake just slides the wheel, so you have no stopping power going backwards. And I've wished for a rear brake lever where the clutch lever would be on normal bikes. I was pretty sure I had a bike like that at one time and sure enough, my CT90 had both a foot brake and hand brake for the rear wheel. I really wish Honda had continued to put that on these new bikes. I think it was a great feature for certain conditions. Now for the elite riders you are going to say, "just open the throttle when coasting backwards to get the rear tire to help you stop or slow down." (just like we slip the clutch on bike with a clutch lever). If the engine is dead, a bike with the hand clutch lever will still lock up the rear tire if you engage or slip the clutch. The CT125 will just coast backwards (freewheeling). Anyway, I thought it was a nice feature on the older bikes.
 

Spydie

Member
Joined
Feb 7, 2021
Messages
62
My 74 doesn’t.
I guess only certain years had it. I'm looking at Oxmotorcycles and Rekluse to add a hydraulic lever and brake lines to the rear master cylinder to gain that left hand brake lever.
 

Spydie

Member
Joined
Feb 7, 2021
Messages
62
If you order a service manual right now there's going to be some kind of snafu. I got on the list to get one with the arrival of their new supply on the 20th. After not hearing from them on shipping it I emailed them and told them their website tracking of my order wasn't showing any progress and asked what happened to my order. I got this back: (I also talked to another guy that accidentally ordered the owners manual then used their system to cancel the order, but it didn't work, and they told him their system is down also)

"At this time the system is not available We will look int to this issue and get back to you. This will cause a delay in response and we do appreciate your patience.

Diane


Customer Service "
 

Spydie

Member
Joined
Feb 7, 2021
Messages
62
Turns out they didn't ship and nobody at Helminc has a clue what's going on there. My email said mine shipped and "here is your FedEx tracking number." But it's not a fedex tracking number, it's a USPS number, and when you check it, it hasn't shipped, a label was just made. What a screwed-up company. You can't check your order online because "our system is down and we can't track anything." "We've got IT working on it." REALLY???, IT has been working on it for a month now and they can't find the software problem? And how are they preparing orders and shipping if they don't have any working software? How are they actually accessing the orders and processing them? It's all a bunch of lies. I swear Helminc is part of the government!
 

AZ7000'

Well-known member
Joined
Jan 28, 2021
Messages
992
Turns out they didn't ship and nobody at Helminc has a clue what's going on there. My email said mine shipped and "here is your FedEx tracking number." But it's not a fedex tracking number, it's a USPS number, and when you check it, it hasn't shipped, a label was just made. What a screwed-up company. You can't check your order online because "our system is down and we can't track anything." "We've got IT working on it." REALLY???, IT has been working on it for a month now and they can't find the software problem? And how are they preparing orders and shipping if they don't have any working software? How are they actually accessing the orders and processing them? It's all a bunch of lies. I swear Helminc is part of the government!
Deep breath amigo, It will be ok. They sell hundreds, maybe thousands of other manuals, I'm betting it will work out but if not, not that big of a deal...
 

Kritou

Active member
Joined
Mar 15, 2021
Messages
322
My bad. you have to pick Trail 125 and not CT125, and you have to add a quantity to the box before pushing the "add to cart" button! DUH... Now I have it on backorder.
Wow .... $149 shipping to UK! For that they should be able to ship Perseverance’s manual to Mars ...
 
Top