Snail Air Horn Installation

[JayJay]

The comments file explains what the pictures are showing. I did provide a copy of the literature that came with the horn which I did not find helpful.

 

[Cpd419]

I mounted a wolo in the factory location

 

[Kev250R]

The PO of my Trail mounted one of these on my Trail. Honestly I'm not a huge fan but haven't felt like replacing it. It does make a lot of noise!

 

[JayJay]

The PO of my Trail mounted one of these on my Trail. Honestly I'm not a huge fan but haven't felt like replacing it. It does make a lot of noise!

It is rated at 130db. It is louder that the stock horn on my 2021 CT125 Trail.

 

[Kev250R]

It is rated at 130db. It is louder that the stock horn on my 2021 CT125 Trail.

I believe that! Mine will eventually get replaced with something else. It's fine for now though.

My biggest problem has been that the horn button on my Trail is backwards from where the Horn buttons are on my Yamaha and KTM's are. The couple of times when I've needed the horn I've hit the turn signals. First world problems LOL

 

[JayJay]

The horn button on my TC125 Trail is above the turn signal switch on the left switch assembly. Above the horn button is the high/low beam selector. This seems to be standard for the Honda line of motorcycles.

 

[Kev250R]

The horn button on my TC125 Trail is above the turn signal switch on the left switch assembly. Above the horn button is the high/low beam selector. This seems to be standard for the Honda line of motorcycles.

For Honda's, yes. My Grom was in the same position. Like I said though, my other non-Honda bikes are reversed. First world problems...

 

[dmonkey]

Same. Almost every other make of bike I ride has the Horn as the bottom center or bottom left control, below the turn signal(s). I will give it to Honda that the control button/switch mechanisms are really nice feeling though, they're a better tactile experience than on most other bikes.