Video Link for USB Charger Detailed Installation

[Slowrideiowa]

USB charger installation video. This is a long video with a lot of detail. Just hanging out in the garage. I really appreciate the information and how to videos that folks post, so I thought I would try to give back a little with some videos of my own. I hope it helps some of you. Slowride

 

[Kritou]

USB charger installation video. This is a long video with a lot of detail. Just hanging out in the garage. I really appreciate the information and how to videos that folks post, so I thought I would try to give back a little with some videos of my own. I hope it helps some of you. Slowride

Was there not a suitable earthing point somewhere up by the headstock to save taking the negative wire back to the battery terminal?

 

[Slowrideiowa]

Was there not a suitable earthing point somewhere up by the headstock to save taking the negative wire back to the battery terminal?

Yes. There are a lot of ground options. Just wanted to keep it unexposed as much as I could. Could also get a ground in the headlight area if you wanted to. Green wires at connectors for turn signals and headlight. The battery ground is just my preference mainly.

 

[Kritou]

Thanks. What length were those black plastic “pop” connectors - I’m sure I will have to buy some spares with my clumsy old hands!

 

[Slowrideiowa]

Thanks. What length were those black plastic “pop” connectors - I’m sure I will have to buy some spares with my clumsy old hands!

If you’re referring to the black heat-shrink tubing, I’ve had it awhile but I think it came in a kit with different sizes and you just cut it to length.

 

[Kritou]

I was thinking of those two black pop screw replacements that are used to partly secure the battery cover panel

 

[Slowrideiowa]

I hear what you’re saying. Lucky I haven’t lost one yet.
.815 overall length
.238 outside diameter at the base
.184 on the pin

 

[Kritou]

I hear what you’re saying. Lucky I haven’t lost one yet.
.815 overall length
.238 outside diameter at the base
.184 on the pin

Thank you for your effort and time - I think I now have the part numbers

 

[bustupbiker]

You can get them on the bay of E's and that Banggood site.

 

[Kritou]

You can get them on the bay of E's and that Banggood site.

Hi Lyn - what would be the search term for them on eBay and Bangood?
Any news on the Service Manual?

Tony

 

[bustupbiker]

I think when i got mine i put in Push pins, and all sorts of plastic push pins and fasteners came up.
I then looked for the sizes i wanted and ordered in packs of 50 i think.

 

[bustupbiker]

Fastener Clips Rivet Retainer Push Engine Cover 100PCS for Car Bumper Fender Door Trim Panel

Only US$9.99, buy best Fastener Clips Rivet Retainer Push Engine Cover 100PCS for Car Bumper Fender Door Trim Panel sale online store at wholesale price.

uk.banggood.com

 

[Kritou]

Nice find, now ordered - between us we should now be able to supply the worldwide CT125 community!

 

[bustupbiker]

If can spend the time looking through the site, you will find any thing you want..NOT always the best quality
but for the price one can not complain.