The lights are not wired up yet but I'm just showing this mainly for the light mounts. The PIAA mounts are relatively expensive but are infinitely adjustable. While nearly every other mount is fixed to the bar clamp (you can pivot it 90 degrees to the bar), these allow you to swivel the mount also. Not a big deal if your bar is perfectly vertical or horizontal. But, say you want to mount lights to the stock "crash bar". It slopes back at an angle and any fixed mount would point the lights at the ground. The swivel option would straighten that out. You can see the side pinch bolt that allows the swivel on the last pic.
The RIGIDs are actually mounted upside down. Unscrewed the front ring and flipped it 180 degrees so the logo was right. Will add lighted pics once it's wired up.
PIAA mount link: https://www.amazon.com/PIAA-74000-1...ocphy=9013478&hvtargid=pla-750148897152&psc=1
The RIGIDs are actually mounted upside down. Unscrewed the front ring and flipped it 180 degrees so the logo was right. Will add lighted pics once it's wired up.
PIAA mount link: https://www.amazon.com/PIAA-74000-1...ocphy=9013478&hvtargid=pla-750148897152&psc=1
Last edited: