Oil Spinner filter (Centrifugal Filter) clean out and high-capacity oil pump installation

[QuantiQualification]

Please subscribe @ https://www.youtube.com/@QuantiQualification?sub_confirmation=1

 

[Happy Campa]

I struggled to get this cover back on and now it looks like this link dingus is out of place. I can't find any information on proper alignment. Could someone verify this?

 

[dmonkey]

Yes, it fell out of place. You'll need to pull the right side crankcase cover again and line it back up, reassemble. Some tips that have been shared are to lay the bike on its left side, and/or to use grease to hold the parts in place as it's a fight against gravity. I have a photo of it assembled in another thread on this topic.

It looks like you've already got the service manual opened to 2-23 for that diagram, make sure the dot is lined up on the clutch lever as well. Step 1 on page 2-23.

For another view of the parts diagram, a backward view from what you are seeing looking at it with the cover removed, you can reference https://www.revzilla.com/oem/honda/2021-honda-trail-125-abs/right-crankcase-cover?submodel=ct125aac

Here's another post with some photos, and a link to it on the Honda Innova/Wave which has the same semi-automatic clutch setup: https://hondatrail125.com/index.php?threads/oil-spinner-cleanout.567/#post-5622

It is in common on the Wave 125i, Honda Super Cub C125, and a few more in case you wanted to search YouTube for more videos to use as a reference. I know I've found some Super Cub ones on the topic of documenting the oil spinner cleanout process.

 

[Happy Campa]

Yes, it fell out of place. You'll need to pull the right side crankcase cover again and line it back up, reassemble. Some tips that have been shared are to lay the bike on its left side, and/or to use grease to hold the parts in place as it's a fight against gravity. I have a photo of it assembled in another thread on this topic.

It looks like you've already got the service manual opened to 2-23 for that diagram, make sure the dot is lined up on the clutch lever as well. Step 1 on page 2-23.

For another view of the parts diagram, a backward view from what you are seeing looking at it with the cover removed, you can reference https://www.revzilla.com/oem/honda/2021-honda-trail-125-abs/right-crankcase-cover?submodel=ct125aac

Here's another post with some photos, and a link to it on the Honda Innova/Wave which has the same semi-automatic clutch setup: https://hondatrail125.com/index.php?threads/oil-spinner-cleanout.567/#post-5622

It is in common on the Wave 125i, Honda Super Cub C125, and a few more in case you wanted to search YouTube for more videos to use as a reference. I know I've found some Super Cub ones on the topic of documenting the oil spinner cleanout process.

Thank you very much! I got it in the correct way now.